Operating; Cleaning; Storing - Westfalia LASER 2000 CT-680 Bedienungsanleitung

Operating

1. Insert the desired accessory into the suction opening.
2. Make sure all filters and the dust container are correctly inserted.
3. Insert the plug into a wall socket and switch the vacuum cleaner with the
ON/OFF switch on.
4. As the hand cleaner is provided with strong suction power, hold the cleaner
always on the handle when sucking. So you will keep it from falling down.
Please also observe the safety notes and do not point the suction opening
towards persons, animals, plants or sensitive objects.
5. While sucking make sure not to block the suction opening and the ventilation
slots on both sides of the housing in order to avoid overheating and damaging
the motor.
6. Empty the dust container in due time, to maintain the strong suction power of
the unit.
7. Switch the vacuum cleaner off and pull the power plug.

Cleaning

First, switch the vacuum cleaner off before cleaning.
Clean the housing of the vacuum cleaner with a moistened cloth only. Do not use
chemicals or abrasives, in order not do damage the surfaces.
All filters can be washed under running water. Make sure the filters are com-
pletely dry before re-inserting into the housing and switching on.
Do not dry the filter in the dryer or on a heater. Allow the filter to air dry.

Storing

Store the hand cleaner in a dry place and protect it from dust and dirt.
All manuals and user guides at all-guides.com
Operation
11