Compact Flash Slot - Fujitsu FPC1701ATS Benutzerhandbuch

58_0536_00.book Page 26 Wednesday, August 22, 2001 9:07 AM
S t y l i s t i c L T P - 6 0 0 P e n T a b l e t - C h a p t e r T w o

Compact Flash Slot

The compact flash memory slot allows you to add a flash module (CF Card) for compact, removable
data storage.
To install a compact flash module,
1. Press the compact flash eject button to remove the plastic insert (see Figure 2-3). Pressing the
button lifts the insert away from the system. Save the insert; it should be installed whenever a
compact flash module is not installed in order to prevent foreign objects from contaminating the
slot.
2. With the arrow on the module label facing upwards, insert the compact flash module into the slot
and push it in until it is firmly seated.
Compact
Flash Slot
To remove a compact flash module,
1. Press the compact flash eject button to remove the compact flash module (see Figure 2-3).
Pressing the button lifts the module away from the system.
2. Pull the compact flash module out of the slot.
3. If another compact flash module is not being installed, replace the insert that was removed above.
26
Figure 2-3 Installing a Compact Flash Module
1
Compact Flash
Eject Button
Compact
Flash Card