Fujitsu FPC1701ATS Benutzerhandbuch Seite 20

58_0536_00.book Page 10 Wednesday, August 22, 2001 9:07 AM
S t y l i s t i c L T P - 6 0 0 P e n T a b l e t - C h a p t e r O n e
Connector/
Peripheral
Infrared 1-6
keyboard port
Compact Flash 1-4
Slot
† Remove the mini-dock interface cover to access this port.
In addition to the connector and interface icons, there are a number of icons that illustrate component
orientation and buttons. These icons are illustrated in Table 1-3.
Icon Description
Battery
Battery Release Switch
Suspend/Resume
(Power On) Button
Shut Off Button
10
Table 1-2 Peripheral Connectors/Interfaces
Fig.
Pen Tablet Icon
Ref.
An infrared receiver built into the pen tablet allows
you to communicate with a wireless infrared
keyboard. The keyboard infrared port works
optimally between 10 to 30 cm (approximately
4 in. to 12 in.) from the keyboard infrared port,
located on the bottom edge of the pen tablet.
Ensure that there is a clear line-of-sight path
between the infrared receiver on the pen tablet
and the infrared transmitter on the keyboard.
CF CARD Install a compact flash card to expand system
memory.
Table 1-3 Additional System Icons
Icon
Illustration
No icon
Purpose
Purpose
Indicates the location of the removable
battery cover.
Indicates the battery release button.
Indicates the Suspend/Resume button. This
button can be reconfigured as a Power On
button through the BIOS.
Powers down the system in the event of
system difficulty. Use the tip of your stylus
to press this button.