Electrolux ERN29651 Benutzerinformation Seite 13

On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the upper
pin.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
Downloaded from Fridge-Manual.com Manuals
All manuals and user guides at all-guides.com
C
B
A
Installing the appliance
Do these steps.
1. Install the appliance in the niche.
2. Adjust the appliance in the niche.
min.
200 cm
2
Caution! Make sure that the mains
cable can move freely.
Push the appliance in the direction of the
arrows (1) until the upper gap cover
stops against the kitchen furniture. Make
sure that the distance between the ap-
pliance and the cupboard front-edge is
44 mm.
Push the appliance in the direction of the
arrows (2) against the cupboard on the
opposite side of the hinge. Make sure
that the clearance between the appli-
ance and the cupboard is 4 mm.
electrolux 13
min.
200 cm
2
2
1