Factory-Set; Parameter/Register - Trix H0 Ce 6/8 III-Serie Bedienungsanleitung

CV Discription
1 Adresse
2 PoM Minimum Speed
3 PoM Acceleration delay
4 PoM Braking delay
5 PoM Maximum speed
8 Factory Reset/Manufacturer Recognition
13 PoM Functions F1 - F8 in analog operation
14 PoM Functions F9 - F15 and lights in analog operation
17 Extended address (upper part)
18 Extended address (lower part)
19 Multiple Unit Address
21 PoM Functions F1 - F8 on Multiple Unit
22 PoM Functions F9 - F15 and lights on Multiple Unit
Bit 0: Reversing direction
Bit 1: Number of speed levels 14 or 28/128
29 PoM
Bit 2: DCC operation with braking area (no analog operation possible)
Bit 5: Address length 7 Bit/14 Bit
63 PoM Volume
PoM = Program on the Main; must be supported by the controller.
* The values for the desired settings must be added.
All manuals and user guides at all-guides.com
DCC Value

Factory-Set

1 - 127 3
0 - 255 7
0 - 255 6
0 - 255 4
0 - 255 210
8 131
0 - 255 0
0 - 255 1
CV 29, Bit 5 =1 192
CV 29, Bit 5 =1 128
0 - 255 0
0 - 255 0
0 - 255 0
0/1
0/2
6*
0/4
0/32
0 - 255 255
11