miniland thermoadvanced easy Bedienungsanleitung Seite 35

Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Voltage
dips, short
interruptions
and voltage
variations on
power supply
input lines
IEC 61000-
4-11
Power
frequency
(50/60 Hz)
magnetic field
IEC 61000-4-8
NOTE: UT is the a.c. mains voltage prior to application of the test level.
± 2 kV for power
supply lines ±
1 kV for input/
output lines
± 0.5kV, ± 1 kV
line(s) to lines
± 0.5kV, ± 1 kV,
± 2 kV line(s) to
earth
0 % UT; 0.5 cycle
At 0°, 45°, 90°,
135°, 180°, 225°,
270°and 315°
0 % UT; 1 cycle
and
70 % UT; 25/30
cycles
Single phase:
at 0°
0 % UT;
250/300 cycles
30 A/m
Mains power quality
Not should be that of a
applicable typical commercial or
hospital environment.
Mains power quality
Not should be that of a
applicable typical commercial or
hospital environment.
Mains power quality
should be that of a
typical commercial or
hospital environment.
If the user of the device
requires continued
Not
operation during power
applicable
mains interruptions, it
is recommended that
the device be powered
from an uninterruptible
power supply or a
battery.
Power frequency mag-
netic fields should be
at levels characteristic
30 A/m
of a typical location in
a typical commercial or
hospital environment.
35
ENGLISH