Technical Data; Installation - Electrolux IK155510 Benutzerinformation

Warning signal
The warning signals of the control and sig-
nalling system of the appliance are dis-
played on the Visual Display.
The system will give out a signal if:
• An error has occurred in the operation of
the appliance. In case the electronic sys-
tem of the appliance cannot identify the
real temperature a sign will appear on the
temperature display.
• Until the staff of the customer service ar-
rive at the spot and solve the problem,
the appliance will continue operating with
the help of a spare program.

TECHNICAL DATA

Dimension of the recess
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the light-
ing device. Contact your Service Center
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
Height
Width
Depth
Positioning
This appliance can be installed in a dry, well
ventilated indoor (garage or cellar) also, but
for optimum performance install this appli-
ance at a location where the ambient tem-
perature corresponds to the climate class
"Installation".
gaskets. Contact the Service Center.
880 mm
560 mm
550 mm
230 V
50 Hz
electrolux 43