Metabo KHE 5-40 Originalbetriebsanleitung Seite 11

D = Max. drilling diameter in concrete with
3
milling cutters
s = Maximum impact rate
max
W = Single impact force
C = Number of chisel positions
m = Weight without mains cable
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
AC power
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission value (hammer drilling
h, HD
into concrete)
a = Vibration emission value (chiselling)
h, Cheq
K = Uncertainty (vibration)
h,HD/Cheq
Typical A-effective perceived sound levels:
L = sound-pressure level
pa
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
Values measured as per EN 60745.
L = Measured acoustic power level as per
WA(M)
2000/14/EG
L = Guaranteed acoustic power level as per
WA(G)
2000/14/EC
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
ENGLISH en
11