Maintenance; Product Specification; Supply; Technical Specification - Mettler Toledo InFlow 751 Bedienungsanleitung

InFlow 751
5
6
6.1
6.2
7
© 06/2021 METTLER TOLEDO
Printed in Switzerland

Maintenance

The sensor, housing and socket must be kept clean. Replace any damaged seals or components
immediately.
Details on maintenance of the sensor are contained in the sensor operating instructions.
Attention: Before mounting the housing, it is imperative to clean and grease the O-rings with
anti-seize.
Important: It is advisable that all O-rings are replaced periodically.

Product Specification

Supply

A standard delivery comprises the following items:
• Housing Type InFlow 751;
• Operating instructions.

Technical Specification

Temperature range:
PVC
PVDF
Pressure range:
PVC
PVC
PVDF
PVDF
Material: All wetted parts made of PVC or PVDF according to order specification. Seals made of Viton
Dimensions: See Chapter 9.
For further details on sensors, see sensor data sheets or ask the supplier of your housing.

Spare Parts

Articles
Electrode holder PVC d=32
Electrode holder PVC d=50
Electrode holder PVDF d=63
0 ... 60 °C;
0 ... 100 °C
4 bar / 45 °C (58 psig /113 °F);
1 bar / 60 °C (14.5 psig /140 °F);
4 bar / 75 °C (58 psig /167 °F);
1 bar /100 °C (14.5 psig / 212 °F)
7
.
®
Order-No.
52 400 653
52 400 654
52 400 658
Retractable Housing InFlow 751
52 400 740 E