Specifications - Maktec MT961 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Press
2-1. Slide switch lever
4-1. Wheel guard
4-2. Screw
4-3. Bearing box
5-1. Lock nut
5-2. Depressed center grinding
wheel/Multi-disc
5-3. Inner flange

SPECIFICATIONS

Model
Wheel diameter
Spindle thread
Rated speed (n)/ No load speed (n
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
For Model MT961
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K) : 3 dB(A)
For Model MT962
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K) : 3 dB(A)
All manuals and user guides at all-guides.com
Explanation of general view
6-1. Lock nut wrench
6-2. Shaft lock
8-1. Lock nut
8-2. Abrasive cut-off wheel/diamond
wheel
8-3. Inner flange
8-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
9-1. Limit mark
)
0
ENE048-1
ENF002-1
ENG905-1
) : 82 dB(A)
pA
) : 93 dB(A)
) : 83 dB(A)
pA
) : 94 dB(A)
10-1. Brush holder cap
10-2. Screwdriver
MT961
100 mm 115 mm
M10 x 1.5 M14 x 2
-1
11,000 min 11,000 min
270 mm 270 mm
1.9 kg
For Model MT963
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model MT961
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
emission value may be different.
Model MT962
Work mode : surface grinding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
values may be different.
3
MT962 MT963
125 mm
M14 x 2
-1 -1
11,000 min
270 mm
2.0 kg 2.0 kg
/II
) : 84 dB(A)
pA
) : 95 dB(A)
WA
ENG900-1
2
) : 5.5 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
2
) : 6.5 m/s
h,AG
2