Setting Date & Time - TIPTEL easyDECT 3300 Bedienungsanleitung

2.8 Setting Date & Time
If you like to fully get benefit from the functions of
your cordless phone, you have to enter the current
date and time. The first time the phone turns on, the
display asks you to enter the current date and time,
in this case just perform the steps 5 and 6.
To change the date and time any time in Standby
mode:
1. Press the MENU soft key to display the Main
menu items.
2. Press the navigation keys
choose BS Settings, and press the SELECT soft
key. The display asks you to enter the Base PIN
(identification code).
3. Enter the base PIN (preset at the factory to
0000) and press the SELECT soft key.
4. Press repeatedly the
7:System time, then press the SELECT soft
key. The current settings are displayed: the
date on the upper line in the Day/Month/Year
format and the time in the Hours:Minutes ones
in the lower line.
5. Enter the current date and time using the
number keypad (6 digits for the date and 4 ones
for the time as below explained).
All manuals and user guides at all-guides.com
6. Press the SELECT soft key to save the setting.
7. Press the
✍ To enter the date, type the six digits which represent
✍ If you want to correct a digit in the middle while setting
to
✍ If the electric supply is disconnected from the base (e.g.
or key to choose
key to return to Standby mode
(waiting for incoming calls).
the day, month and year. e.g. for 15th June 2003 enter
150603. You can enter the year from 2000 to 2050.
Enter the time in a 24-hour format. e.g. for 10:15PM
enter 2215.
the date and time, use the
the cursor to the wrong number, then enter a correct
number.
a black out or a disconnection of the AC adaptor's
cable), the system time resets and need to be set again.
or key to move
UK
S U
ETTING P
13