Special Wash Cycles And Options - Hotpoint Ariston LLD 8M121 Gebrauchsanleitung

Special wash cycles and Options

Notes:
Optimum performance levels when using the "Fast" and "Express
30'" cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
ASSISTENZA_EN_LVS@indesitcompany.com
Wash options*
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle (see Table of wash cycles) , the
corresponding symbol/indicator light flashes rapidly 3 times.
If an option is selected which is not compatible with another
previously-selected option, it flashes 3 times and goes off, while
the option selected first will remain active.
To deselect an option which has been set by mistake, press
the corresponding symbol/button again.
Delayed start
It is possible to delay the start of the cycle for a period
of time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other options,
press the DELAYED START symbol; the symbol on the display
lights up. Press the DELAYED START symbol to select the time
at which you wish the wash cycle to begin (1 to 24 hours.)
2. Confirm your selection using the Start/Pause symbol; the
countdown will begin. The selected delay period is displayed.
3. Once this time has elapsed, the DELAYED START indicator
light goes off and the wash cycle begins.
To deselect it, press and hold the DELAYED START symbol until
the text OFF appears.
The DELAYED START function cannot be set once a
wash cycle has been started.
Short Time
This option can be used to reduce the duration of the
main wash cycles while maintaining the same washing
and drying performance levels.
Having selected the wash cycle, press the Short Time button/
symbol. To deselect the option, press the same button again.
Extra drying
To improve the dryness level of the crockery, press
the EXTRA DRYING button; the symbol/indicator
light will light up. If it is pressed again, the option will be
deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
The EXTRA DRYING option results in a longer wash
cycle.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS symbol; the corresponding symbol/
indicator light will light up on the display. The "Multi-functional
tablets" option results in a longer wash cycle.
The use of tablets is only recommended when the MULTI-
FUNCTIONAL TABLETS option is available.
This option is not recommended in wash cycles which
do not specify the use of multi-functional tablets.
Zone Wash
This option makes it possible to carry out the wash
cycle in the selected rack only. Select the wash cycle and
then press the ZONE WASH button: the selected rack lights
up and the wash cycle starts in the selected rack only. Press
the button again to deselect the option.
The option is available with the following wash cycles:
Intensive and Normal.
Select the option and the Intensive cycle to start the
ULTRAINTENSIVE ZONE washing. This wash cycle is ideal
for very soiled mixed loads, e.g. pans and saucepans,
dishes with heavy encrustation or difficult-to-clean crockery
(grater, vegetable mill, dirty cutlery). The spraying pressure is
stronger and the washing temperature higher, thus ensuring
optimum handling of stubborn stains.
Select the option and the Normal cycle to start the SAVING
ZONE washing. This function makes it possible to reduce
water and energy consumption, thus achieving excellent
washing and drying results. Cycle duration is longer.
Remember to load the crockery in the selected rack only
EN
25