Setting Mode; How To Navigate In Setting Mode - AEG FSK83838P Benutzerinformation

12 www.aeg.com
Settings
Latest prog. selec‐
tion
Display on floor
Brightness
Language
Reset settings
WiFi
Network
Forget network
PNC number
1) For more details, refer to the information provided in this chapter.
2) For more details, refer to the chapter "Wireless connection".

6.1 Setting mode

How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Values
ON
OFF (default)
ON (default)
OFF
From level 0 to level
9
List of languages
(default: English)
YES
NO
ON
OFF (default)
Signal strength
IP
MAC
YES
NO
Number
A B C
Description
Enable or disable the automatic selection of
the most recently used programme and op‐
1)
tions.
Activate or deactivate TimeBeam.
Adjust the brightness of the display.
Set the preferred language.
Reset the appliance to the factory settings.
Activate or deactivate the wireless connec‐
2)
tion.
Check the information about the network
connection.
Reset the network credentials.
Check the PNC number of your appliance.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
• The lights related to the
Previous, OK and Next are on.
• The display shows the first
available setting and its current
value.
How to change a setting
Make sure the appliance is in setting
mode.
1)
2)
1)
and for