Setting Mode; How To Navigate In Setting Mode - AEG FSK76748P Benutzerinformation

12 www.aeg.com
Number Setting
2
3
4
5
6
7
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in

setting mode.

When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
1 2
6.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
Values
Rinse aid level 0A - 6A (default:
6A)
End sound On
Off (default)
Auto door open On (default)
Off
Key tones On (default)
Off
Latest pro‐ On
gramme selec‐ Off (default)
tion
Display on floor On (default)
Off
3 4 5 6 7
1)
Description
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
Activate or deactivate the TimeBeam.
A B
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
The lights related to the Previous, OK
and Next are on.
C
and for