Inhaltsverzeichnis
Werbung
Legacy Tilt Adapter
1
Align the 5 screw holes on the Adapter with the 5 mounting points
on the Carriage plate.
2
Using the 2.5 mm hex key, install the 5 M4 × 6 mm flat head machine screws
to attach the Legacy Tilt Adapter to the UFEA. ①
Attach VESA Bracket to Monitor
1
Position the VESA bracket over the mounting points on the back of
the monitor.
2
Use a Phillips screwdriver to install the provided VESA screws to attach the
VESA bracket to the monitor.
The VESA bracket features a 75 mm and 100 mm hole pattern.
You may also use the VESA screws provided with the monitor.
4
①
②
Werbung
Inhaltsverzeichnis
