To Check The Phone-To-Pc Connection; To Disconnect Your Phone From Your Pc - LG -P920 Benutzerhandbuch

Wireless connection with
Bluetooth:
1
On your mobile phone, go
to Settings > Wireless &
Networks > Bluetooth settings.
Select Turn on Bluetooth and
then select Discoverable.
2 If you have previously connected
using a cable, run the New
Connection Wizard to create a
new connection.
3
Run the Connection Wizard on
the computer, select "Bluetooth
connection", then "Next".
4
The wizard will start searching
for Bluetooth-enabled mobile
phones. When the mobile phone
you want to connect to appears,
click "Stop" to stop searching.
5
Select "LG-P920" from the device
list and click "Next". You can
rename the device if you wish.
6
Enter the PIN code (e.g. "0000")
and click "Next".
7
On your mobile phone, accept the
request and enter the same PIN
code, then touch "OK".
8
Enter the On-Screen Phone
password and click "Next". (The
default password is "0000").
9
Touch "OK" to exit.
To check the phone-to-
PC connection
Once the devices have been
connected, drag down the notification
bar at the top of the home screen
to check the On-Screen Phone
connection status.
To disconnect your
phone from your PC
Click in the top left of the
On-Screen Phone window.
Alternatively, drag down the
notification bar at the top of the
home screen and select "On-Screen
Phone". Touch "Yes" in the
Disconnect window.
9