To Check The Phone To Pc Connection; To Disconnect Your Phone From Your Pc - LG P990 Benutzerhandbuch

Settings
2 If you have previously
connected using a cable, run
the New Connection Wizard to
create a new connection.
3 Run the Connection Wizard on
the computer, select "Bluetooth
connection", then "Next".
4 The wizard starts searching
for Bluetooth-enabled mobile
phones. When the mobile phone
that you wish to connect to
appears, click "Stop" to stop
searching.
5 Select "LG-P990" from the
device list and click "Next".
You can rename the device if
you wish.
6 Enter the PIN code (e.g.
"0000") and click "Next".
7 On your mobile phone, accept
the request and enter the same
PIN code, then touch "OK".
90
8 Enter the On-Screen Phone
password and click "Next" (the
default password is "0000").
9 Touch "OK" to exit.
To check the phone to
PC connection
Once the devices have been
connected, drag down the
notification bar at the top of the
home screen to check the On-
Screen Phone connection status.
To disconnect your
phone from your PC
Click in the top left of the On-
Screen Phone window. Or, drag
down the notification bar at the
top of the home screen and select
"On-Screen Phone". Touch "Yes"
in the Disconnect window.
NOTE: You must restart your
phone after shutting down the On-
Screen Phone service.