Key Tones; Wireless Connection - AEG FSK83828P Benutzerinformation

6.6 Key tones

The buttons on the control panel make a
click sound when you press them. You
can deactivate this sound.
6.7 Latest programme
selection
You can set the automatic selection of
the most recently used programme and
options.

7. WIRELESS CONNECTION

You can connect your dishwasher to the
home wireless network and then link it to
your mobile devices in My AEG Kitchen
app. This functionality allows you to
remotely control and monitor your
dishwasher.
My AEG Kitchen app can be downloaded
from the app store on your mobile
device. The app is compatible with iOS
and Android operating systems. Check
the compatible versions of the operating
systems in the app store.
Router parameters
Frequency/
Protocol
Max Power
Encryption
7.1 How to connect the
dishwasher to the network
and to the app
To connect your dishwasher, you need:
• Wireless network with the Internet
connection.
Wi-Fi: 2.4 GHz / 802.11
b-g-n
Wi-Fi: 5 GHz / 802.11 a-n
(for indoor use only)
Bluetooth Low Energy
5.0: 2.4 GHz / DSSS
Wi-Fi 2.4 GHz: <20 dBm
Wi-Fi 5 GHz: <23 dBm
Bluetooth Low Energy
5.0: < 20 dBm
WPA, WPA2
The latest programme that was
completed before the appliance
deactivation is saved. It is then selected
automatically after you activate the
appliance.
When the latest programme selection is
disabled, the default programme is ECO.
• Mobile device connected to the
wireless network.
1. Launch My AEG Kitchen app on your
mobile device and follow the
instructions in the app. When
prompted in the app, activate the
wireless connection in the
dishwasher.
2. To activate the wireless connection,
press and hold simultaneously
for 2 seconds.
• The indicator
• The display shows On for a few
seconds and then AP.
• All buttons are inactive except for
the on/off button.
3. When prompted, enter the home
network credentials in My AEG
Kitchen app.
If the credentials are not
entered, the dishwasher
cancels the procedure after
some time and returns to the
programme selection.
If the connection is successful, the
indicator is steady and the
letters AP are off. The appliance returns
to the programme selection. Refer to
"Daily use" to activate the remote start.
If the connection is
unsuccessful or the display
shows upd, refer to
"Troubleshooting".
If you want to cancel the procedure,
switch the appliance off and on.
ENGLISH 15
and
flashes.