Regulation of the water softener system (IF INCLUDED)
(control panel version with display)
'Hidden' control panel
7
D
'Exposed' control panel
To reach an optimal regeneration setting, keep the button DELAY
the appliance. Now, the current setting is being displayed (e.g., d4). To modify the setting (within 6
seconds), press the same button again until the desired level is reached (see table).
Wait for 6 seconds without modifying the setting. A buzzer sound will indicate that the new setting was
accepted. On the display, the request select programme will appear.
Only
use
dishwashers. Other products
won't obtain the desired effect.
Refilling of rinse aid
The rinse aid, which is released automatically
during the final phase of the wash cycle,
guarantees that the dishes dry quickly and
prevents the formation of stains and calcium
sediments.
The rinse aid container S is located on the inside
of the door.
• Fig. 8, remove the container cap T by turning it
1/4 revolution anticlockwise.
• Fig. 9, open cover T1.
- Fill container with rinse aid up to the broken
line.
Maximum quantity: about 140 ml.
- Close the rinse aid compartment again.
- Clean off possible residues of rinse aid with a
cloth, otherwise too much foam might be pro-
duced during the rinsing process.
Indication of rinse aid level
• Electric (if included) (fig. 18-18.a)
The appliance is equipped with a level indicator
for the rinse aid. When it lights up, more rinse
aid needs to be added.
• Mechanical (fig. 8)
More rinse aid needs to be added when the
indicator (located on the container F) is clear
(
).
When the container is full, the indicator has a
dark coloration.
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
20
1 2 3 4 5 6 7 8 9 0
GB
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
D
rinse
aids
for
Regeneration
levels
degrees
d1
d2
>15 <25
d3
>25 <40
d4
>40 <60
d5
Note: The salt level indicator on the
Display is deactivated when position D1
is used.
(fig. 7) pressed when turning on
D
S
T 1
S
French
German
degrees
<15
<8,4
>8,4 <14
>14 <22,4
>22,4 <33,6
>33,6
>60
>= higher / <=lower
8
F
T