Lock /Unlock; Functions - Blaupunkt 5FS300SE0 Bedienungsanleitung

3. 2 Functions

Display screen
① Refrigerating chamber temperature display area
③ Quick cool icon
Operation button
A. Temperature setting button of refrigerating chamber B.
C. Vacation lock button
/
Display
When power on the refrigerator for the 1st time, the whole display panel will shine for 3 seconds.
then the display panel enters the normal display.The first time for using the refrigerator, the default set
temperatures of refrigerating chamber, freezing chamber is 5° C/-18 °C respectively.
When the error occurs, the display panel shows the error code (see next page); during normal running,
the display panel shows the set temperature of refrigerating chamber, freezing chamber.
Under normal running, if there is no operation or opening door action within 30s, the display panel will be
locked,the light of display panel will go out after the locked state

Lock /unlock

In the unlocked state, long press the lock button
The icon lights up and buzzer sounds, it means the display panel is locked, at this time, button operation
cannot be implemented;
In the locked state, long press the lock button
The icon go out and buzzer sounds, it means the display panel is unlocked, at this time, button operation
can be implemented;
Temperature setting of refrigerating chamber
Click the button
adjusting button of the refrigerating chamber, the set temperature will be reduced 1 °C;
The temperature setting range of refrigerating chamber is 2~8 °C. When the set temperature is 2 °C, Click the
button again, the set temperature of refrigerating chamber will switch to 8 °C.
（The picture above is only for reference.）
④ Quick freeze icon
to change the set temperature of refrigerating chamber, each click of temperatur
A
B
C
② Freezing chamber temperature display area
⑤ Vacation icon
Temperature setting button of freezing chamber
continued for 30s.
for 3 seconds, enter the lock state,
for 3 seconds, enter the unlocked state,
34
⑥Lock icon