Wall mounting
Be sure to choose a solid wall or a crosspiece to
install the charging stand.
<How to install>
a Tighten two wood screws
(nominal diameter: 2.7
- 3.1 mm) at intervals of
29 mm so that the screw
head can float about 3.0
mm from the wall.
b Hook the wall-mounting
screw holes on the back
of the charging stand on
the screws, and fix them.
<How to remove>
a Lift the charging stand.
b Pull it forward.
EW1513 EU v3.indb 17
Frequently asked questions
29 mm
Approx.
Wall-mounting
3.0 mm
screw holes
ⓑ
ⓐ
Quesiton
Will the battery
Please charge it once every 6
be exhausted
months if you have not used
▶
after a long
it for over 6 months since the
period of disuse?
battery may deteriorate.
Can the battery
The service life of the battery
be charged
will not be affected thanks to
▶
before every
the use of a lithium ion battery.
use?
Answer
17
2020/6/3 下午4:18