Inhaltsverzeichnis
Werbung
When used for the first time (after inserting the batteries or
pressing the "RESET" key), the clock will start to receive the
RC signal in 5 minutes with the signal strength indicator
flashing.
SIGNAL STRENGTH INDICATOR
The signal indicator displays signal strength in 3 levels.
Wave segment flashing means time signals are being
received. The signal quality could be classified into three
types:
Weak signal quality
Acceptable signal quality
NOTE:
1.
Everyday the unit will automatically search for the time
signal at 2:00, 8:00, 14:00 and 20:00.
2.
Always place the unit away from interfering sources
such as TV set, computer, etc.
3.
Avoid placing the unit on or next to metal plate.
4.
Closed area such as airport, basement, tower block
or factory is not recommended.
5.
Do not start reception on a moving article such as
vehicle or train.
7
Excellent signal quality
DAYLIGHT SAVINGS TIME (DST)
The clock has been programmed automatically to switch
when the daylight savings time is in effect. Your clock will
show "DST" during the summer.
MANUAL TIME AND CALENDAR SETTING
If you are out of the reach of the Radio Controlled Transmitter
or if the reception is not reachable, the time can be set
manually. As soon as the signal of transmitter is received
again, the clock will automatically synchronize with the
exact time.
1.
In normal time mode, press and hold the "TIME" key
for 2 seconds until the HOUR digit flashes.
2.
Press the "UP" or "DOWN" key to change the value of
the flashing HOUR digit.
3.
Repeat the above operation to set the time and
calendar in this order: Hour > Minute > Second > 12/24
Hr > Year > Month > Date > Day language.
8
Werbung
Inhaltsverzeichnis
