Inhaltsverzeichnis
Werbung
2.
Insert 2 x AA size batteries into the battery compartment.
Make sure you insert them the right way according to
the polarity information marked on the battery
compartment.
3.
Replace the battery door.
NOTE:
1.
Once the channel is assigned to one transmitter, you
can only change it by removing the batteries or resetting
the unit.
2.
Avoid placing the transmitter in direct sunlight, rain or
snow.
WEATHER STATION:
1.
Remove the battery door and insert 2 x AA batteries into
the battery compartment. Make sure you insert the
batteries the right way according to the polarity
information marked on the battery compartment.
2.
Replace the battery door.
3.
Press the "RESET" key to re-start the clock and it will
synchronize the channels of transmitter automaticall y .
NOTE:
1.
The building material and the position of the receiver
and transmitter affect the effective range. So try various
locations to obtain the best result.
2.
Place the units away from metal objects and electrical
appliances to minimize the interference. Position the
receiver and transmitter within the effective
transmission range: 80m free field in usual circumstances.
5
NOTE:
1.
The alarm and snooze will be automatically turned on
when setting the alarm time.
2.
Once the snooze is turned on, the 4-step crescendo
alarm will sound 4 times in 5-minute interval. The alarm
duration is 60 seconds.
3.
Pressing the "SNOOZE/LIGHT" key can stop the current
alarm and enter the snooze mode; while pressing the
"ALM" key can not only stop the alarm but also turn off
the snooze function.
VIEW THE CHANNEL
The default channel is Channel 1. In normal time mode,
press "UP" or "CHANNEL" key to view the channel from 1 to
3. Besides, the channels can automatically switch by pressing
and holding the "UP" or "CHANNEL" key for 3 seconds.
READING INDOOR/OUTDOOR TEMPERATURE RECORDS
Change the temperature unit to °C for Celsius or °F for
Fahrenheit by pressing "°C/°F" key.
NOTE:
1.
If no signals are received or the transmission is
interfered, "—" will appear on the LCD.
2.
Relocate the clock or transmitter in other positions
and make sure the transmission is within the effective
range of 80m approx.
3.
After several trails in vain, please reset the clock
10
Werbung
Inhaltsverzeichnis
