LEMI 4 Bedienungsanleitung Seite 4

1. INTRODUCTION
The successful and safe operation of the chair is guaranteed only if it is used in accordance with
the specifications in this manual and, in general, in the accompanying documentation; therefore
it is essential to carefully read and keep all the relative documentation.
Although the chair is equipped with active and passive safety features, not all risks can be avoided due to its incorrect
use. You must always make sure that all users have fully understood the rules of use; the manufacturer declines any
responsibility for damage to persons or property resulting from improper use of the device. Do not remove or dama-
ge the labels, notices and warnings placed on side of the chair. In case you need to restore them, please contact the
manufacturer. The manufacturer Brusaferri & C., declines any and every responsibility for failure to observe the rules
of safety and prevention described in the various sections of this manual and for any damage caused by improper use.
All interventions on the chair (maintenance, adjustments, repairs, cleaning) must be carried out by suitably trained
personnel and in accordance with what is indicated in this manual.
1.1. Destination of use and lifetime
Lemi 4 and Lemi Med chair are suitable for ENT visits, dental surgery and implantology, stomatology, ortho-
dontics, ophthalmology, diagnostics, minor surgery interventions; Hemo 4 especially suitable for blood sam-
ple taking, chemotherapy and rehabilitation. The estimated lifetime for this chair is 10 years.
WARNING! It is forbidden any use of the chair other than that described in this manual.
Brusaferri & C. declines any responsibility for malfunctions or damages to persons or
property due to uses other than those specified in this manual.
The chair should be used only by personnel who are informed about the use mode, ope-
ration and its safety equipment.
1.2. Preservation of the manual
This operating manual should be kept for future reference. We recommend:
Keep the manual in a place accessible and known to all operators, protected from moisture and heat and
protected from the direct sun beams. Use the manual in order not to damage any part of the content:
do not remove, tear or modify any part of the manual.
In the case of sale or transfer of the chair to another person, this manual and its annexes should be delivered intact to
the new users.
WARNING! Please read this operation manual before using the chair. Anyone who uses
the chair should be properly informed on the parts of this manual relevant to the ope-
rations to be performed.
1.3. Labelling of the chair
The chair is provided with labels with the following data, in conformity with actual rules:
• Manufacturer name and address (Brusaferri & C srl Casalbuttano CR)
• Ce mark
• Model and type
• Serial Number (Sr. n.)
• Week and year of production (Made on .../...)
WARNING! It is recommended not to remove the labels on the machine; labels must be
preserved well fixed, whole and easy to read.
WARNING! The data present on each label, must be reported in case of need of assistance
or spare parts.
4