LEMI 4 Bedienungsanleitung Seite 11

7.1. Operator
The chair is controlled by an operator through the foot pedal (or the hand control); the operator must posi-
tion themselves so as to have complete view of the controlled parts and of the patient.
WARNING! During the functioning of the chair the operator should always remain in the
vicinity of the controls; it is forbidden to leave the chair unattended during its operation.
Operators should pay attention to avoid creating potentially dangerous situations for
their own or other's safety.
All people working on the chair must be properly trained on the correct methods of work
and informed about its proper functioning. They also need to be aware of the parts of this
documentation relevant to their work.
Operators must not wear clothes with drapes that could get caught by moving part of the
chair. Proper clothing is made of close-fitting garments, especially on the upper limbs.
Nor the operator and the patient must wear rings, necklaces, bracelets, wristwatches, ties
or other objects that could get caught by moving parts of the machinery. In case of allergy,
cover the chair with a sheet.
The operator must stand in order to always control all the adjusted parts and also the
patient.
7.2. Use of mattress
IMPORTANT! It is mandatory to cover and protect the mattress with disposable paper covers or
washable sponge covers for its correct and hygienic preservation. The upholstery could be dama-
ged by the normal heat of the skin or by a prolonged use of essential oils or cosmetic product. Any
replacement caused by damages due to misuse won't be considered under warranty.
7.3. Controls
The chair can be controlled by a pedal with cable, a wireless pedal or a hand control. All the controls work only
when activated: the chair movement will stop as soon as the operator releases the button/pedal, except for the
AUT (Automatic return to the initial position) which can be stopped by pressing any button/pedal
The operator only can use controls (foot and hand control) to move the examination chair
K
AUT
7. INSTRUCTION FOR USE
HANDSET CONTROL
Push-button A: Chair Up
Push-button A1: Chair Down
Push-button B: Back Up
Push-button B1: Back Down
Push-button C: Legs Up
Push-button C1: Legs Down
Push-button D: Trendelenburg Up
Push-button D1: Trendelenburg Down
Push-button E: Syncronized Back Up and Legs Down
Push-button E1: Syncronized Back Down and Legs Up
Push-button AUT: Return from original position of the chair, to
allow customer to get up or down easily.
11