Cleaning, Care And Maintenance; Operating The Timer; What To Do If - AEG VH 206 Bedienung Und Installation

4.4.1 Operating the timer

Standard time setting
Scale on the timer = 24 hour clock.
» Set the marking to the current time.
24
Programming the heating time
Note
To adjust the heating time, set the operating mode
to "Timer mode".
1 tab = 30 minutes' heating time
» Specify the beginning and end of the heating
time or times. Then pull up the tabs opposite the
corresponding numbers.
24
2
1 1 tab up (30 minutes): Heating starts: 12:30 h -
heating ends: 13:00 h
2 2 tabs up (60 minutes): Heating starts: 05:30 h -
heating ends: 06:30 h
Note
To achieve energy-saving operation in timer mode,
at the temperature selector set a lower standard tem-
perature for the switch-off time than the required
room temperature. During the heating time the appli-
ance heats with 2000 W. To save energy, never select
a longer than necessary usage time.
1
2
1
Operation – for users and qualified contractors
5. Cleaning, care and
maintenance
If a pale brownish discolouration appears on the appli-
ance casing, wipe this off as soon as possible with a
damp cloth. Clean the appliance when cold with ordinary
cleaning products. Avoid abrasive or corrosive cleaning
products.
Material losses
!
Never spray cleaning spray into the air slot.

6. What to do if...

...the appliance does not heat:
» Check the temperature set at the appliance and the
MCB/fuse in your fuse box.
If you cannot remedy the fault, notify your qualified con-
tractor. To facilitate and speed up your request, provide
the number from the type plate (000000-0000-000000).
Model: VH 206
E - Nr. XXXXXX
2.00 kW 1/N/PE~230V 50Hz
Montageanweisung beachten !
Made in Germany
Type: FDH 5018
F-Nr. XXXX XXXXXX
IP 23
15