Niceboy PILOT Q9 RADAR Bedienungsanleitung Seite 29

CONNECTING THE CAMERA TO A PC
Connect the USB data cable (not included) to the miniUSB
port of the camera and the other end to the USB in the PC.
After connecting to a PC, you will have the following modes to
choose from:
1. Storage: it is possible to manage files that are stored on a
memory card (camera acts as external storage)
2. PC camera: can be used as a camera in programs that
allow the connection of an external camera (microphone
cannot be used).
Notice: supported systems are Windows 8 and later and MacOS
11 and later.
CONNECTING THE CAMERA TO THE PHONE VIA W
Install the LuckyCam application (for free) on your phone (in
the Appstore for iOS and GooglePlay for Android). Do not
start the application right after installing it and follow the
instructions:
1. Turn the Wi-Fi in the camera on by selecting it in the menu.
2. Open the Wi-Fi settings on your mobile phone and connect
to the camera network (name: PILOT Q9 RADAR, password:
1234567890).
3. Once connected to the network, launch the application
and you can start controlling the camera with your phone.
Notice: before running the application, enable all the permissi-
ons of the application in the phone settings, turn off the „data
connection" of the mobile phone and leave only Wi-Fi turned on.
The application can only be installed on mobile phones with iOS
8.0 and later and on devices with Android 6.0 and later.
-F
I I
29