Water Supply - Comet Spa KSX 1850 GOLD Bedienungsanleitung

EN
MAIN FEATURES AND TECHNICAL SPECIFICATIONS
Fuse
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Minimum inlet water pressure
Recoil of cleaner gun
Sound pressure level - Uncertainty (*)
Sound power level
Operator arm vibrations - Uncertainty (*)
Lenght x width x height
Detergent tank capacity
(*) Measurements taken in compliance with EN 60335-2-79
All features and technical specifications are only indications. The Manufacturer reserves the right to modify
the appliance as it deems necessary.
For other technical data, refer to the identification plate on the
machine (see data interpretation on page 15 of this manual).
USAGE
WARNING: First of all read the Safe-
ty Warnings and then this Specific
Manual.
> PUT INTO SERVICE
See fig. A
> STARTING UP
See fig. B
> HIGH PRESSURE LANCE
See fig. D
> DETERGENT SUCTION
See fig. E
> HIGH PRESSURE HOSE
See fig. F
22
1850
16 A
5 °C - 41 °F
900 l/h - 15 l/min - 172 US gph
1 MPa - 10 bar - 145 psi
0, 1 MPa - 1 bar - 14,5 psi
21 N
76 dB(A)
93 dB(A)
1,5 m/s² - 0,5 m/ s²
300 x 400 h 870 mm
0,8 l - 0,20 US gal
> WATER SUPPLY
Water supply collection
WARNING (symbol): machine not suitable
for connection to the potable water mains.
The cleaner can only be connected to the water
mains if the water mains is separated by a back-
flow preventer.
Make sure that the hose is at least Ø 13mm-1/2
inch and that it is reinforced.
WARNING: Water that has flown
through backflow preventers is con-
sidered to be non- potable.
IMPORTANT: Only clean or filtered
water should be used for intake. The
delivery of the water intake tap should
be equal to the double of the maximum
pump range.
Place the cleaner as close to the water supply
1950
24,5 N
1,5 dB(A)
+/-
92 dB(A)