Adjusting The Screen Display (When Using A Digital Signal) - Sharp LL-T2010 Bedienungsanleitung

Adjusting the screen display
Adjustments can be made using On Screen
Display (OSD) Menu provided.
On Screen Display for adjustment
If you are using Windows, open the Adjustment
Pattern on the accompanying Utility Disk. (p. 17)
If your system is not Windows, you can not use the
Adjustment Pattern. Therefore display an image
that makes the entire screen light and adjust it
through checking visually its actual tone.
This chapter provides the procedure how to adjust
the screen by using Adjustment Pattern (for
Windows)
How to adjust
1.Press the MENU button.
The COLOR CONTROL Menu will be displayed.
At this point relevant menu options can be
adjusted.
Each time the MENU button is pressed the next
menu is selected. (COLOR CONTROL → MODE
SELECT → OSD Menu disappears)
Notes:
- The OSD Menu automatically disappears
approximately 30 seconds after the last
command.
All manuals and user guides at all-guides.com
21
(When using a digital signal)
COLOR CONTROL Menu
Notes:
- On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to [STD].
- Use the buttons to select [sRGB], [COOL],
[·], [STD], [·], [WARM] or [USER].
- Selecting USER will display the setting values for
[R-CONTRAST], [G-CONTRAST] and [B-
CONTRAST], in order to make fine adjustments.
- Use the SELECT button to select [R-
CONTRAST], [G-CONTRAST] and [B-
CONTRAST].
- To go to the next menu: MENU button
sRGB ..... sRGB is international standard of color
representation specified by IEC (Interna-
tional Electrotechnical Commission).
Color conversion is made in taking
account of liquid crystal's characteristics
and represents color tone close to it
original image.
COOL ..... Color tone bluer than standard
• ........... Color tone slightly bluer than standard
STD ........ Color tone standard setting
• ........... Color tone slightly redder than standard
WARM .... Color tone redder than standard
USER
R-CONTRAST ..... button for blue-green
button for red
G-CONTRAST ..... button for purple
button for green
B-CONTRAST ..... button for yellow
button for blue