Sharp UA-KIL80E Bedienungsanleitung Seite 14

PRE-FILTER AUTO
CLEANING
(Only UA-KIL80E)
The pre-filter auto cleaning will operate for about
8 minutes automatically when the product reaches
a certain operating time since a completion of the
previous pre-filter auto cleaning.
During the pre-filter auto cleaning, the on-going
operation will be suspended.
You can set the pre-filter auto cleaning interval to
48 hours or 720 hours. The default is 48 hours.
(Page 12, 13)
Auto cleaning
(about 8 minutes)
48 hours or
Operating
time
720 hours
Previous auto cleaning
During the pre-filter
auto cleaning, the Pre-
Filter Auto Cleaning
Indicator is flashing.
NOTE
• Depending on the conditions, the start of auto
cleaning maybe delayed.
(Example: When the light sensor detects that
the room brightness is "dark".)
• If you want to stop the auto
cleaning, touch Power ON/OFF
Button.
• If you want to start the auto
cleaning manually, Please touch Auto Mode
Button and Mode Button 3 seconds at once.
Auto cleaning
(about 8 minutes)
48 hours or
720 hours
Back
Panel
Pre-Filter (inside)
Touch for 3 sec.
HOW TO CHANGE
VARIOUS SETTING
You can change the functions in the table on
page 13.
1.
(with the product OFF)
2. Select "Function number".
Forward
Set
3. Select "Setting number".
Forward
Set
4. Touch Power ON/OFF Button to
finish the setting mode.
EN-12
♪
Touch for 3 sec.
Reverse
♪
or
･･･
(F8: Only UA-KIL80E)
♪
Reverse
♪
or
♪
～
♪
～
Turn off
♪
♪