Technibel MCW Aufstellungshandbuch Seite 10

MARKING
This product marked
GB - Low voltage no. 2006/95/CE.
- Electromagnetic Compatibility no. 89/336 EEC, modifi ed 92/31 and 93/68 EEC.
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE 2002/96/EC
At the end of its working life this equipment must not be disposed of as an household waste.
It must be taken to special local community waste collection centres or to a dealer providing this service.
Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment and human
health deriving from an inappropriate disposal and enables its components to be recovered and recycled to obtain signifi cant
savings in energy and resources.
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.
CONTENTS
1 - GENERAL
1.1 - FOREWORD
• The equipment must be installed, started-up and maintained
by authorised and qualifi ed personnel, in accordance with local
rules and professional standards.
1.2 - GENERAL SUPPLY CONDITIONS
• Generally speaking, the material is transported at the
consignee's risk.
• The consignee must immediately provide the carrier with
written reserves if he fi nds any damage caused during
transport.
1.3 - VOLTAGE
• Before any operation, check that the voltage and the frequency
indicated on the device corresponds with that of the mains.
2 - PRESENTATION
2.1 - DESCRIPTION
1 - Air inlet (suction).
2 - Air outlet (blowing).
3 - Vertical defl ection louvre.
4 - Horizontal defl ection louvre.
5 - Air fi lters.
6 - Lamps and receiver.
7 - Remote control unit.
2
conforms to the essential requirements of the European Directives:
1 - General ........................................................................ 2
2 - Presentation ................................................................. 2
3 - Installation of the unit ................................................... 3
4 - Connections / Electrical wiring diagrams ..................... 4
5 - Accessories ................................................................. 8
6 - Starting ........................................................................ 8
7 - Maintenance ................................................................ 8
1
5
1.4 - PRECAUTIONS
1.4.1 - HYDRAULIC CIRCUIT
- Minimum water inlet temperature : 4°C.
- Maximum water inlet temperature : 60°C.
- Maximum operating pressure
1.4.2 - AMBIENT AIR
- Minimum air recirculation temperature : 5°C.
- Maximum air recirculation temperature : 32°C.
Important: During installation shut-down, in case of ambient
temperature near 0°C, there is a risk that the hoses may freeze.
Envisage draining the hydraulic circuit.
1.5 - USE OF EQUIPMENT
• This equipment is intented for the air-conditioning of premises
and to provide comfort for the personnel.
1.6 - MODELS
• "2-pipe" for all sizes.
6
4
3
2
7
: 16 bar.