JVC RM-LP55 Bedienungsanleitung Seite 14

OPERATION (continued)
C C
MENU FUNC1
FILE W.BAL
o SHUTTER MODE (ELECTRONIC SHUTTER)
SETTING
●
Changes the camera's shutter mode.
Selectable modes
The following 5 MODE can be selected:
NORMAL, STEP, EEI, V.SCAN, SLOW
1.
Press SHUTTER button I.
ASHUTTERB and the current shutter mode will
●
be indicated on the LCD screen.
SHUTTER
Press SHUTTER button.
SHUTTER
NOTE:
if AGAIN MODE ALC + EEI WORKINGB is
indicated on the LCD panel, set the gain mode to
a mode other than AALC + EEIB, then start from
the beginning again.
●
When gain mode is set to AALC + EEIB, the
shutter mode will be fixed at AEEIB, and you
cannot set to any other shutter mode.
GAIN MODE
ALC+EEI WORKING
If ARANDOM TRIGGER WORKINGB is displayed
in the LCD, set the random trigger mode to OFF,
then reset as necessary.
●
Once the random trigger mode is set to ON, the
shutter mode is fixed to the specified speed. You
cannot select other settings for the shutter mode.
RANDOM TRIGGER
WORKING
E-14
All manuals and user guides at all-guides.com
D
ENTER
FUNC2 /SET
GAIN SHUTTER
I
NORMAL
2.
Select the shutter mode using FUNC2 button
D.
Each time is pressed, the mode changes
●
from NORMAL N STEP N EEI N V.SCAN N
SLOW N NORMAL ...; pressing
the modes in reverse order.
● In the STEP mode, the current shutter speed is
indicated to the left.
● If a shutter mode other than NORMAL is set,
the SHUTTER LED lights. (The LED doesn't
light if the V.SCAN shutter mode is set to A1/
60.0 (1/50.0 for E version model)B.)
● When shutter mode is set to AEEIB, setting of
iris mode using ALC IRIS SET is possible.
(A pg. 18, AREMOTE CONTROLLER
OPERATION MODE SETTINGSB)
Select shutter mode.
3.
In the STEP mode, select the shutter speed
using FUNC1 button C.
SHUTTER
1/250
● Each time is pressed, the mode changes
from 1/100(1/120)*N 1/250 N 1/500 N 1/1000
N 1/2000 N1/4000 N1/10000 N ...; pressing
changes the modes in reverse order.
● The shutter speed that is not compatible with
the camera will not be displayed.
Select shutter speed.
* 1/100 : U-version model
1/120 : E-version model
o V.SCAN (VARIABLE SCAN) SETTING
●
Varies the camera's shutter speed in sequence
so that it can match the scanning speed of a
computer monitor display, etc.
1.
Select AV.SCANB using FUNC2 button D.
SHUTTER
1/60.0 V .SCAN
V.SCAN speed
● The current V.SCAN speed be indicated on the
LCD screen.
Set to AV.SCANB.
changes
FUNC2
STEP
FUNC1 FUNC2
FUNC2