Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.3
Threshold Values: MAX/MIN
This option allows you to set a measurement range. Values outside of this measurement range
will not be accepted.
-
The individual digits of the lower limit MIN or the upper limit MAX can be selected by
means of the arrow keys
-
The values can be set via the arrow keys
you will hear a sound and the displayed value will increase or decrease by one unit.
-
By pressing the Back key
window.
1.4
Average Time
Here you can determine how many measuring values will be used to calculate the average
value. Up to 32 measurement values can be used.
1.5
Material Type
This function allows you to set the material to be tested. The possible materials are listed under
2.1 Technical specifications.
Alternatively, you can press the Material key
material selection window directly.
1.6
Hardness Scale: HB/HL
Via this function, you can set the hardness scale for your measurements. The possible
hardness scales are also listed under 2.1 Technical specifications.
You can also select the hardness scale directly if you press the Hardness scale key
1.7
Probe Option
This setting allows you to select the impact device. A D-type impact device is included in the
standard delivery. Optional impact devices of the types DC, D+15, C, G and DL are available at
PCE Instruments.
2.
Gauge configuration
2.1
Buzzer
Here you can turn the key tone on or off.
2.2
Backlight
This setting allows you to activate or deactivate the display backlight in line with the brightness
in your environment and your individual requirements.
2.3
Language
You can select either English or German as your menu language.
2.4
Software Ver
Here you can see the current software version.
and
.
and
, you save the values and return to the previous
when you are in menu mode to enter the
© PCE Instruments
29
. When pressing these keys,
.
Werbung
Inhaltsverzeichnis
