Care And Cleaning; Cleaning The Filter - Electrolux TWGL5E Benutzerhandbuch

10.2 Adjustment of the
remaining laundry moisture
degree
To change the default degree of the
remaining moisture of the laundry:
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Push at the same time and hold down
the Dry Plus (Trocken+) and Anti-
crease (Knitterschutz) buttons.
One of the symbols goes into the view on
the display:
5. Push the Start/Pause button again
and again until you set necessary
degree.
6. To memorise the setting, push at the
same time the Dry Plus (Trocken+)

11. CARE AND CLEANING

11.1 Cleaning the filter

At the end of each cycle the indicator
Filter (Sieb) is on and you must clean the
filter.
- the maximum dry laundry
- the more dry laundry
- the standard dry laundry
and Anti-crease (Knitterschutz)
buttons for approximately 2 seconds.
10.3 Deactivating the Water
container (Behälter) indicator
1. Turn on the appliance.
2. Wait approximately 8 seconds.
3. Select 1 of available programmes.
4. Push at the same time and hold down
the Dry Plus (Trocken+) and Time
Save (Zeit Sparen) buttons.
One of 2 configurations is possible:
• the Water container (Behälter)
indicator: is on and the symbol
goes into the view - the
water container indicator is
permanently on
• the Water container (Behälter)
indicator: is off and the symbol
goes into the view - the
water container indicator is
permanently off
ENGLISH 17