Preparation Before Performance - Schubert Carnegy 61 Bedienungsanleitung

EN
24

PREPARATION BEFORE PERFORMANCE

Power connection
1. Firstly, Make sure whether the power switch of Electrical piano is at OFF
position. If not, pull the Switch to OFF position.
2. Connect the power cord: Insert power cord into power socket.
Caution: When you do not use this electrical piano, you should get out of the
plug of AC power from power socket safely in order to avoid the obstacle of
piano parts or other accident for the power is on for along time.
• Do not pull out power cord from power socket when the power is on.
• Fuse replacement shall only be made by qualified person.
Use of Pedal Sustain
The function of sustain can produce natural sustain by stepping upon sustain
pedal when you perform. Please insert the plug of sustain pedal into SUS
PEDAL jack. You can open/close the sustain function through the sustain pedal
plug.
Use of headphone
Insert headphone plug into "HEADPHONE" jack in the rear of electrical piano.
At the same time internal speaker cuts off automatically. It does not interfere
with anybody else, if you use headphone during performance, it is special for
personal monitor and exercising at night.