Electrolux WELL WA51-303-Serie Bedienungsanleitung Seite 15

33. The used filter might be heavily coated with dust and particulate matter so before
opening the front panel, please ensure a disposable bag or packaging is at hand to
place the used filter in.
34. Remove the front panel and the mesh pre-filter and put them aside. Next remove
the filter layer which is at end of life and place it in the disposable bag at hand.
35. Next, please remove the plastic packaging from the replacement filter and insert
the filter in the appropriate place. Please ensure the VOC carbon filter goes in
first inside the unit, followed by the ultrafine particle filter. Reinsert the mesh
pre-filter and close the front panel. The filter change icon on the product UI will
no longer be lit and the Wellbeing App will indicate the same, with a new filter
lifetime reading.
NOTE: In case the change is only reflected on the product UI and not the Wellbeing App, please restart the App and
the unit, before further troubleshooting.
36. Discard the used filter as well as any plastic packaging according to local recycling
guidelines. The RFID tags contain circuitry and hence are to be disposed
separately from the rest of the filter.
CUSTOMIZING – picture pages 6-7
The WELL A7 / A5 series Air Purifier was designed with a unique form and aesthetic
sense to ensure it fits in with your home and its furnishings, unlike other appliances.
In addition, the series comes with many customization kits for the unit that add to
the aesthetics but also functionality of the unit.
TOP HANDLE CUSTOMIZATION
The polyurethane leather (PU) handle at the top of the unit is attached to the unit by
way of two screws. Follow the steps below to attach or replace an existing top handle.
37. If you are replacing an existing top PU handle:
a. Remove the two screws, twisting counterclockwise and set aside along
with existing handle.
b. Remove any protective plastic packaging from the new handle and fit it
onto the unit by tightening the screws, twisting clockwise, till you meet
some resistance. Ensure a snug fit with no gap in between the unit and
the screw.
Classified as Internal