Herunterladen Inhalt Inhalt Diese Seite drucken

Electrolux WELL WA51-303-Serie Bedienungsanleitung Seite 19

Vorschau ausblenden Andere Handbücher für WELL WA51-303-Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 104
5
The air purifier or
fan
does
operate
6
The air purifier is
running but the air
quality does not
improve
7
The air purifier
produces or emits
a strange smell
8
I am unable to
onboard the air
purifier to the App
Classified as Internal
Ensure that the house, wall socket being used, and
not
the unit are all receiving power. If needed, try
pushing the power plug firmly into the wall socket to
check if this resolves the issue.
If you have recently (re)placed a filter please remove
and reinsert it. Check to make sure that the filter is
oriented correctly, so the RFID sensor can detect it.
If neither of the above steps OR instructions in the
Wellbeing App help, please refer to item 9 in the
table.
If in SMART mode, closely monitor the difference in
air quality levels within the Wellbeing App for next 20
minutes – if you do not see any improvement of the
air quality values in the Wellbeing App during this
period then follow the step below.
Change to MANUAL mode and adjust the fan speed
to a higher level to see if this helps resolve the issue.
If you still do not see any improvement, please try the
step below.
Try and close any open doors OR windows to the
outside of the room and rerun the unit at the highest
fan speed for 20 minutes. If this resolves the issue,
we recommend that you operate the unit in this
sealed environment as much as possible, till the air
quality outside (or in other rooms) is also at a good
level.
The first time you run the unit, you may perceive a
plastic, glue or paint smell – especially near the air
outlet grill – this is unavoidable in some cases (like
the 'new car smell') but should disappear quickly.
If you perceive a burning smell, please disconnect the
unit and contact Electrolux authorized service center
for further support.
If you are unable to onboard the unit and connect it
to the Wellbeing App after a couple of attempts
following the steps in the Wellbeing App and FAQ,
then the best course of action is to contact an
Electrolux authorized service center for support.
As a safety
mechanism, to avoid
risk of injury from
the fan blade, the
unit will not operate
if it does not detect
the presence of
filter(s).
If the unit is placed in
a room larger t h a n
the recommended
size, it will take longer
for the air quality to
improve – please be
patient and maintain
the unit at the highest
speed feasible.
The unit comes with
multiple
filters
please ensure you
have the appropriate
filters to tackle the
pollutant you seek to
remove.
Always ensure that
the filters are
covered in
appropriate
packaging while
stored away
between uses.
The WiFi chip in the
unit operates only at
2.4Ghz
so
please
ensure your home
WiFi is operating at
this bandwidth.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis