Electrolux WELL WA51-303-Serie Bedienungsanleitung Seite 13

ONBOARDING – picture pages 6-7
NOTE: Some steps in the onboarding flow may have changed, please follow step-step instructions in the latest version
of the App as reference in case of discrepancy. Please ensure home WiFi is running on 2.4 GHz band and not 5 GHz
band, as this will not be recognized by the air purifier.
20. Please find the Wellbeing App in the iOS App or Google Play store, download it,
sign up and login to the App. Here you will be able to 'Add a device' to the App
and follow the step-step instructions for onboarding the unit – steps below are
indicative.
21. After plugging the unit into the power socket, please long press the POWER
button for 5 seconds until the WiFi icon
indicates that the unit's hotspot is activated and is ready for being connected to
the WiFi.
22. Head over to the Wellbeing App and using the phone's camera to scan the WiFi
barcode. The WiFi barcode can be found on the rating label sticker on the unit
(typically after the mesh pre-filter, reference image 7). You can also manually
enter the digits under the barcode into the App if scanning it does not work.
23. Connect the App to the unit's hotspot.
24. Choose the 2.4 GHz home WiFi that the unit should connect to from available list
and then enter the password for this home WiFi into the App – wait for the unit
to establish a connection.
25. Complete the steps of naming your newly onboarded air purifier!
26. Later, if you would ever like to reset the WiFi credentials stored on your unit
please long press the POWER button
blinking (i.e. like step 20, hotspot activated). While in this state, again, long press
the POWER button
lit. Unit's WiFi settings are now reset and it will not aim to connect to your WiFi
network.
CLEANING, CARING & STORAGE – picture pages 6-7
NOTE: Always unplug the air purifier before cleaning to prevent shock or fire hazards. Never use abrasive, harsh
detergents OR wax for cleaning the unit. The high efficiency filters cannot be washed, they must always be replaced
when at the end of life.
Classified as Internal
for 5 seconds until WiFi icon
starts blinking rapidly – this
for 5 seconds until WiFi icon
stops blinking and is not
starts