Technical Data; Noise/Vibration Information - Bosch GWS Professional 24-300 J Originalbetriebsanleitung

Technical Data

Cut-off Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Max. cutting depth with cutting guide
Reduced starting current
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of un-
favourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.

Noise/Vibration Information

Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 93 dB(A);
Sound power level 104 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Cutting-off concrete: Vibration emission value
2
a =8.0 m/s , Uncertainty K=1.5 m/s
h
Cutting-off metal: Vibration emission value
2
a =8.0 m/s , Uncertainty K=1.5 m/s
h
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
Bosch Power Tools
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
2
,
Identify additional safety measures to protect
the operator from the effects of vibration such
2
.
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
GWS 24-300
Professional
0 601 364 0..
W 2400
W 1670
-1
min 5000
mm 300
M 14
mm 32
mm 100
kg 10.3
/II
3 609 929 B90 | (1.10.09)
English | 23
GWS 24-300 J
Professional
0 601 364 9..
2400
1670
5000
300
M 14
32
100
–
10.3
/II