Tempo Communications NC-100 NETcat Micro Bedienungsanleitung Seite 5

Important Safety Information
Electric shock hazard:
• Using this unit in a high frequency activated area may result in unstable or inaccu-
rate readings.
• Do not drop or get the unit wet as it may cause internal damage.
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Do not expose the unit to extremes in temperature or humidity.
Refer to "Specifications."
• Use this unit for the manufacturer's intended purpose only, as described in this
manual. Any other use can impair the protection provided by the unit.
Failure to observe these precautions may result in injury and can damage the unit.
Electric shock hazard:
This unit is capable of withstanding voltage input
conditions when connected to normal telephony
equipment (i.e., 50 VDC) for short periods.
Testing is inhibited when greater than a few volts
is connected across a pair with the message
shown here displayed on the screen. Disconnect
the unit immediately to prevent permanent
damage.
Failure to observe this precaution may result in injury and can damage the unit.
NC-100 NETcat Micro
®
5