osann Eno360 Bedienungsanleitung Seite 22

EN
Removal of the belt system
•
Loosen the belt
•
Pull the belt system and the cushion out of their metal brackets on the reverse side
of the child car seat and guide these through the child car seat to the front side
(Fig. A)
•
Remove the shoulder pads and the belt buckles from the belt.
•
Fold the belt together so that it can be stored in the hollow on the back rest behind the
cover. (Fig. B)
•
In order to remove the belt buckle, first move the seat into its maximum lying position. Then
rotate the seat into the 90° position.
•
Remove the cover and move it to the side. (Fig. C)
•
Now bring the metal clip of the belt buckle through the opening and affix the cover again
after this (Fig. D)
•
Ensure that you retain all the parts that are removed in a safe place.
A
C
- 22 -
D
B
Installa
•
Insert th
cushion
and into
•
Ensure
This is
firmly in
•
Press th
order to
length.
•
Insert th
and pre
•
The dis
the con
child ca
ing secu
Installa
•
Remove
•
In orde
adjustm
of the b
other ha
•
In order
the fixa
as poss
the belt