Installation Of Spacer Strips Of The Rear Wall; Installation Of The Backrests And Headrests Of The Bench - Sentiotec Vitamy 164 Montage- Und Gebrauchsanweisungen

Instructions for installation and use

4.8. Installation of spacer strips of the rear wall

Screw the spacer strips to the rear wall (either flush or displaced inwardly up to
10 cm).
Fig. 52: Installation of the spacer strips of the rear wall

4.9. Installation of the backrests and headrests of the bench

Screw in the multi-clips using the mounting template with the accompanying screws.
Fig. 53: Installing the backrests of the bench
p. 40/44
Screws
4 units: 4 x 70