Installation Of The Bench - Sentiotec Vitamy 164 Montage- Und Gebrauchsanweisungen

Instructions for installation and use
Connecting the control panel and the colour light
Close the control panel, USB Dock and colour lamp according to the enclosed
instructions regarding the sound&light power adapter. Mount the power supply
preferably outside on the cabin ceiling or under the bench.

4.7. Installation of the bench

After the control unit has been connected, the bench can be fully installed.
Fig. 51: Attaching the bench
Place the bench on the support slats. Push the seating areas forward.
CAUTION!
Secure the bench against sliding by using the locking screws on the
left and right of the bench cushion as well as on the bench support rail.
Screws
4 units: 4 x 70
p. 39/44
EN