Installation Of The Vitamy 164 Infrared Cabin; Necessary Tools; Infrared Cabine Vitamy 164 Basic / Bt / S&L Parts List - Sentiotec Vitamy 164 Montage- Und Gebrauchsanweisungen

Instructions for installation and use

4. Installation of the VitaMy 164 infrared cabin

Before you start work, check the parts list to see whether all the items have
actually been delivered. If individual items are missing, notify your dealer within
14 days after receipt of the cabin.
For the installation, you will need to have a helper!
We also recommend that the screw holes be pre-drilled.

4.1. Necessary tools

● hammer and insert wood or a rubber mallet
● cordless screwdriver with bits for Phillips screws and Torx
● measuring tape
● water level
● drift punch or wooden blocks 12 mm
● Allen 1.5 mm
4.2. Infrared cabine VitaMy 164 Basic / BT / S&L parts list
No.of Name
Items
Base frame
1 Rear floor frame
2 Floor frame
Wall elements
4 A/A Wall elements with Multiclip, W1,W2,W5,W6
1 Electrical element according to type (see end
parts list)
2 A/B wall elements with cutout, W3,W4
Corner posts
2 Multi-clip corner plug
1 Multi-clip corner plug left front
1 Multi-clip corner plug right front
1 Skirting above glass front
Support slats
1 Roof support slat
1 Roof support slat with drilled holes
2 Roof support slat
p. 8/44
Dimensions
164 x 9 x 4 cm
114 x 9 x 4 cm
193 x 54 x 4 cm
193 x 20,6 x 4 cm
193 x 65,7 x 4 cm
193 x 6 x 6 cm
202 x 6 x 4 cm
202 x 6 x 4 cm
152 x 10 x 4 cm
156 x 4 x 4 cm
156 x 4 x 4 cm
112 x 4 x 4 cm