Connecting The Water Supply - Brandt WFH1676K Installations-, Gebrauchs- Und Pflegeanleitung

Connecting your machine
Connecting to the cold water
supply
Connect the water hose (Fig. 6) :
- By screwing the elbowed end to the
connection on the back of the machine
- By screwing the other end to a tap fitted
with a threaded end piece diameter 20x27
(3/4 BSP).
If you use a self-piecing tap, the useful
opening must be at least 6mm in diameter.
Fig. 6
To avoid any water leaks, remember to
fit the rubber seals in each end and
tighten your connections correctly. The
seals are provided in the accessories
bag.
Water supply:
-- Minimum water pressure: 0.1 MPa or 1 bar
- Maximum water pressure: 1 MPa or 10 bars
87
GB