Herunterladen Inhalt Inhalt Diese Seite drucken

DJI AGRAS T30 Kurzanleitung Seite 8

Vorschau ausblenden Andere Handbücher für AGRAS T30:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 51
Checking the Battery Levels
Press the power button on the remote controller once to check the internal battery level. Press once and press again and hold
for two seconds to power on or off.
Press the battery level button on the external Intelligent Battery once to check the battery level.
When using an external Intelligent Battery, it is still necessary to make sure that the internal battery has some
power. Otherwise, the remote controller cannot be powered on.
Adjusting the Antennas
Lift and adjust the antennas. The strength of the remote controller signal is affected by
the position of the antennas. For an optimal connection between the remote controller
and aircraft, make sure the angle between the antennas and the back of the remote
controller is 80° or 180°.
Try to keep the aircraft inside the optimal transmission zone. If the signal is weak, adjust the antennas or fly the aircraft closer.
Optimal Transmission Zone
Avoid using wireless devices that use the same frequency bands as the remote controller.
If the RTK dongle is used for RTK planning, the module should be disconnected from the remote controller
after planning is completed. Otherwise, it will affect the communication performance of the remote controller.
4. Getting Ready for Takeoff
A. Place the aircraft on open, flat ground with the rear of the aircraft facing toward you.
B. Make sure that the propellers are securely mounted, there are no foreign objects in or on the motors and propellers, the
propeller blades and arms are unfolded, and the arm locks are firmly fastened.
C. Make sure that the spray tank and flight battery are firmly in place.
D. Pour liquid into the spray tank and tighten the cover. Make sure
that the four lines on the cover are aligned to the horizontal or
vertical direction.
E. Power on the remote controller, make sure that the DJI Agras app
is open, and power on the aircraft.
When using for the first time, activate the aircraft using the DJI Agras app. A DJI account and internet
connection are required.
Internet
Low
High
Low
High
80°
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis