Inline 32316P Bedienungsanleitung Seite 21

05: PSE POWER FINE
This feature means that the total power of the PoE budget
can be increased by 5%, 10% or 15%.
06: PSE PORT PRIORITY
This is the PoE priority function. The port can be selected
using the up/down keys and the prioritization can then be
selected between high, medium and low. If all ports have
the same priority, the switch automatically prioritizes the
smaller port numbers over the next larger port numbers.
07: PSE PORT ENABLE
This function is used for activating/deactivating individual
ports. The respective port is selected via the up/down keys.
08: LCD ON/OFF
Here you can set whether the display should always re-
main on or for 10, 20 or 30 minutes and then switch to
sleep mode. The shorter the set interval, the more ener-
gy-saving.
09: FAN CONTROL
This feature also takes into account energy savings and
reduces noise when the switch is operating in a cool and
quiet environment. You have the option of specifying fan
operation. You can choose between „Always on", „20%
PB" and „40% PB". Always on means that the fans are
constantly rotating. 20% means that the fans start to ro-
tate only when the PB (Power Budget) reaches 20%, 40%
stands for fan operation only when the PB (Power Budget)
reaches 40%.
21