Seite 3
CONTENT General Information ....................... Validity ......................... Manufacturer ......................Date ..........................Content of Delivery......................Explanation of warning symbols and notes ..............Technical characteristics ....................15 Intended use ........................16 General warnings ......................16 Improper use ........................16 Application / Commissioning ..................Hardware installation ....................Installation in the rack ....................
BESTIMMUNGSGEMÄSSE VERWENDUNG Der InLine® PoE++ Gigabit Netzwerk Switch ist eine schnelle und fl exible Lösung für ein Upgrade des bestehenden Netzwerks auf das Power over Ethernet System IEEE 802.3af / IEEE 802.3at / IEEE 802.3bt sowie einer Verbindung über Glasfaser, um größere Distanzen zu überbrücken.
LWL SX 850NM mit LC Buchsen, 550m, 1,25Gbit/s, 35335O InLine® SFP Modul LWL LX 1310nm Singlemode mit LC Buchsen, 10km, 1,25Gbit/s oder 32335N InLine SFP Modul LWL LX 1310NM mit LC Buchsen, 20km, 1,25Gbit/s Wenn Sie ein Endgerät anschließen, das kein PoE unterstützt, wird der Switch dieses Endgerät nicht mit Strom versorgen, allerdings weiterhin mit...
ANWENDUNGSDIAGRAMM Bis zu 16x PoE Geräte 16x PoE Ports LED Status Fiber Uplink MENÜSTEUERUNG ÜBER DAS LCD-DISPLAY Menü: Die Taste für ca. 3 Sekunden gedrückt halten, um in das Untermenü zu gelangen Auf-Taste: Zur Auswahl einer Funktion, oder zum blättern zur letzten/nächsten Seite Ab-Taste: Zur Auswahl einer Funktion, oder zum blättern zur letzten/nächsten Seite...
LCD-EIGENSCHAFTEN Das Display zeigt nicht nur den Betriebs- zustand des PoE-Ports an, sondern auch den Zustand jedes Ports, wie z. B.: • Ausgangsleistung • Unterspannung • Überlast • Überspannnung • Kurzschluss • Überhitzung • geringe Auslastung • usw. Zeigt die einzelnen Ports. Die ersten 10 Ports werden auf der ersten, die restlichen auf der nächsten Seite angezeigt.
Seite 10
01: SWITCH-MODUS Der Switch hat 3 Modi zur Auswahl Normal: Standard-Modus des Switches VLAN: Der Switch unterstützt die Isolation jedes Ports, aber jeder Port kann weiterhin mit dem Uplink-Port kom- munizieren CCTV: Der Switch unterstützt eine maximale Distanz von 250 Metern mit einer Übertragungsgeschwindigkeit von 10...
Seite 11
05: PSE LEISTUNGSZUWEISUNG Diese Funktion bedeutet, dass die gesamte Leistung des PoE-Budgets um 5%, 10% oder 15% erhöht werden kann. Dieser Switch hat ein Budget von 300 W. Wenn bspw. alle 16 Ports verbunden sind und eine Gesamtleitung von 280 W bieten, zwei der Ports allerdings nun 30 W für zwei PD (powered devices) benötigen, kann die Gesamtleistung über diese Funktion angepasst werden.
Seite 12
Sie ein Passwort vergeben. Sollten Sie Ihr vergebenes Passwort nicht mehr wissen, wenden Sie sich bitte an unseren Service unter service@inline-info.com. 13: INFO Zeigt die Modellnummer des Switches, dessen Hardware- und Softwareversion sowie unsere Website, wo Sie wei- terführende Informationen zu unserem gesamten Portfolio...
Reinigen Sie den Switch mit einem trockenen, weichen Tuch. Verwenden Sie kein Wasser oder sonstige Reinigungsfl üssigkeiten, die die Elektronik schädigen können. OPTIONALES ZUBEHÖR • 32335M InLine SFP Modul LWL SX 850NM mit LC Buchsen, 550m, 1,25Gbit/s • 32335O InLine® SFP Modul LWL LX 1310nm mit LC Buchsen, 10km, 1,25Gbit/s •...
INTENDED USE The InLine® PoE++ Gigabit Network Switch is a fast and fl exible solution for upgrading the existing network to the IEEE 802.3af / IEEE 802.3at / IEEE 802.3bt Power over Ethernet system as well as a fi ber-optic connection to bridge longer distances.
Module Fiber SX 850NM with LC sockets, 550m, 1.25Gbps, 32335O InLine® SFP Module Fiber LX 1310nm singlemode with LC so- ckets, 10km or 1.25Gbps or 32335N InLine SFP Module Fiber LX 1310NM with LC sockets, 20km, 1.25Gbps. If you connect a device that does not support PoE, the switch will not supply power to this device, but will continue to supply data packets.
APPLICATION DIAGRAM Up to 16x PoE devices 16x PoE ports LED Status Fiber Uplink MENU CONTROL VIA LCD DISPLAY Menu: Press and hold the „Menu“ button for approx. 3 seconds to access the submenu Up key: To select a function or scroll to the last/next page Down key: To select a function or scroll to the last/next page Enter: Confi...
LCD PROPERTIES The display not only shows the operating status of the PoE port, but also the state of each port, such as e.g.: • Output power • Undervoltage • Overload • Overvoltage • Short circuit • Overheating • Low workload •...
Seite 20
01: SWITCH MODE The switch has 3 modes to choose from: Normal: Standard mode of the switch VLAN: The switch supports the isolation of each port, but each port can still communicate with the uplink port CCTV: The switch supports a maximum distance of 250...
Seite 21
05: PSE POWER FINE This feature means that the total power of the PoE budget can be increased by 5%, 10% or 15%. 06: PSE PORT PRIORITY This is the PoE priority function. The port can be selected using the up/down keys and the prioritization can then be selected between high, medium and low.
Seite 22
Here you can protect the switch from unauthorized access by assigning a password. If you do not remember your assigned password, please contact service@inline-info.com. 13: INFO Shows the model number of the switch, its hardware and software version and our website, where you can fi nd more information about our entire portfolio.
Clean the switch with a dry, soft cloth. Do not use water or cleaning fl uids that could damage the electronics. OPTIONAL ACCESSORIES • 32335M InLine® SFP Module Fiber SX 850nm multimode with LC sockets, 550m, 1.25Gbps • 32335O InLine® SFP Module Fiber LX 1310nm singlemode with LC sockets, 10km, 1.25Gbps...
Changes in the sense of technical progress can be made without prior notice. Our products, including packaging, are not toys; they may contain small parts and sharp objects. Keep away from children, please. InLine ist eine Marke der / InLine is a brand of: INTOS ELECTRONIC AG Siemensstrasse 11, D-35394 Giessen www.intos.de...