Phcbi MCO-170AIC Bedienungsanleitung Seite 42

OPERATION/ALARM LOG
4. Select the type of log data to be exported.
• To export all types of data, press "All Ch".
• To export only selected data, press the variable to
be exported:
• Actual Temp.
• Actual CO Level
2
• Door Opening*
Then press "Selected Ch".
* When both of the Auto-lock function and the User-ID mode are ON (refer to pages 56–58), the User-IDs
entered to unlock the outer door are also exported.
Note: When the specified operation log data does
not exist, a warning notice is displayed. Press "OK",
and select a new period, following procedures 3
and 4.
5. When export is completed, press "OK" and
remove the USB memory device from the USB
port.
Note: Even after export is completed, log data
saved in the incubator are not deleted.
Notes:
• A log folder is created in the USB memory device, and the exported file is saved in this folder in CSV
format. The name
20161001-20170101_AllCh.csv or 20170101_Temp.csv).
• On the beginning of the exported file, "MCO-170AIC," and Unique ID (if registered, refer to page 38) are
written (eg MCO-170AIC, RoomA001).
42
of the exported file is in the format date_type of data (eg