Phcbi MCO-170AIC Bedienungsanleitung Seite 15

10
13
18
9. Present date/time display field
The date and time is set when the incubator is
shipped from the factory. Refer to page 46 for
details.
10. Over heat display
High-limit temperature alarm is activated:
"Over Heat" is displayed alternately in normal
characters and reverse video.
11. UV lamp condition display
UV lamp ON: "UV : On" is displayed.
UV lamp OFF: "UV : Off" is displayed.
Note: Displayed in models MCO-170AICUVH/
170AICUV or when the optional UV system set
MCO-170UVS is installed on the model
MCO-170AIC.
12. Outer door (opening/closing) display
Open: "Door : Open" is displayed alternately in
normal characters and reverse video.
Closed: "Door : Closed" is displayed.
Locked: "Door : Locked" is displayed.
13. Message display field
Alarms, errors, or messages are displayed
when a fault occurs. Refer to pages 65–67.
11
17
Note: When there are several errors, the display
shows the message number. For example, if
there are two errors, the display shows "1/2".
14. Message select key
When there are several alarms/errors, the
message on the screen can be changed.
15. Menu key
Press this key to access the Menu screen. Refer
to page 30.
16. H
This key initiates H
to pages 51–55. If the incubator is not equipped
for H
displayed on the LCD touch panel.
17. Unlock key
Press this key to unlock the outer door when it is
auto-locked by the electric lock. Refer to page
58. If the incubator is equipped for auto-lock and
the auto-lock function is ON, this key is
displayed.
18. Buzzer key
Press this key to silence the buzzer. Refer to
pages 37 and 65–67.
16
O key
2 2
O decontamination. Refer
2 2
O decontamination, this key is not
2 2
9 12
14
15
15